pH Electrode Accessories
Grainger pH Electrode Epoxy BNC Flat Tip 12mm Dia
The Grainger Approved pH Electrode is a glass body combination electrode designed for general purpose pH measurements. It has a 12 mm diameter pH bulb and gel filled outer body. The electrode has a BNC connector and 1 m cable. It has a 3.5M KCl electrolyte solution. The electrode measures pH 0-14 and has a temperature range of 0-80°C. It has a response time of 95% in 1 minute.
Grainger pH Electrode Ryton PPS BNC Round Tip
The SensoRex pH Electrode pH 16Z001 is a pH electrode with a glass body and epoxy body junction suitable for laboratory use. It has a pH range of 0-14 pH with an accuracy of ±0.02 pH. The electrode has a Ag/AgCl reference with a ceramic junction and uses a BNC connector. It has a temperature range of 0-80°C. The electrode requires a filling solution such as KCl and has a 12 month warranty. The electrode measures 120 mm length x 12 mm diameter.
Grainger pH Electrode Epoxy BNC Flat Tip 15mm Dia
The Grainger 16Y969 is a 3M Scotch-Brite General Purpose Hand Pad that can be used for a variety of cleaning applications. This 8" x 4" hand pad has an open web construction that allows it to conform to surfaces. It is made of nylon and synthetic fibers that are non-scratching on most surfaces. The pad is durable, rinses easily, and can be used wet or dry for scrubbing, wiping and polishing. It works well on glass, tile, stainless steel and other hard surfaces. The 3M Scotch-Brite General Purpose Hand Pad provides versatile cleaning performance.
Grainger pH Electrode Ryton PPS TNR Flat Tip
The Ryton PPS TNR Flat Tip pH Electrode from DID Inc. is a flat tip pH electrode made of Ryton PPS plastic. It has a double junction Ag/AgCl reference with a ceramic pin junction and features a flat sensing surface for direct contact measurement. This electrode has a 12 mm diameter body, 120 mm length, BNC connector, and 3 m cable. It has a pH range of 0-14 pH, temperature range of 0-80°C, and reference impedance of <500 MΩ. This durable electrode is designed for direct contact measurement in soils, emulsions, slurries, and semi-solids.
Grainger pH Electrode Epoxy BNC Round Tip
The Grainger Approved pH Electrode is a gel-filled, combination electrode designed for general purpose pH measurements. It has a glass body and epoxy body material with a single junction reference. The electrode has a 12 mm diameter pH bulb and is compatible with pH 0-14 measurement range. It has BNC connector type and impedance of less than 600 MOhm. The electrode is maintenance free with no refilling required. It can be used for water, wastewater, food processing and other aqueous solutions. The electrode requires a pH/ORP meter for operation.
Grainger pH Electrode Glass BNC Round Tip
The SensoRex pH Electrode pH 16Y991 is a gel-filled, combination pH electrode with a glass body and epoxy body gel filled reference. It has a 12 mm diameter pH bulb and internal Ag/AgCl reference electrode. The electrode has a BNC connector and 1 m cable. It has a 3/4" NPT thread mounting and is suitable for laboratory, industrial, and municipal water applications. The electrode has a pH range of 0-14 pH, temperature range of 0-80°C, and reference impedance of <300 MOhm.
Grainger Replacement Electrolyte CLD
The SENSOREX CLDA-4015 is a replacement electrolyte solution for SENSOREX chlorine dioxide analyzers. It is used to refill electrolyte cells in CLDA Series chlorine dioxide analyzers after the initial fill has been depleted. This 500 mL bottle of electrolyte solution is manufactured by SENSOREX to properly replenish electrolyte cells in their chlorine dioxide measurement equipment. The electrolyte solution enables accurate measurement of chlorine dioxide levels in water treatment applications. It has an operating temperature range of 32-122°F.
Chemglass Life Sciences pH Probe, with VP, 12 x 120mm
pH probe with VP, 12x120mm. • pH Range: 0-12 • Electrodes are filled with gel reference electrolyte under a pressure of 2.5 bar • Pressure Range: From vacuum up to a process of maximum 36PSI (2.5 bar) • Temperature Range: Steam sterilization/autoclavable to 266°F (0 to 130°C) • In-situ sterilization: Up to 100 cycles under standard conditions • Fully autoclavable or in-situ sterializable
Oakton by Cole-Parmer pH electrode refillable single-junction for Orion A series
Epoxy-body pH electrodes compatible with Orion A-Series meters.
Cole-Parmer pH Electrode Housing, submersible, CPVC, no ATC
These unique holders feature an integrated 316 stainless steel pin ground wire that serves as a temperature compensator and a solution ground. Choose economical CPVC housing or chemical-resistant KYNAR housing. In-line holders have a 1'' NPT(M) connection. Submersible holders have a 3/4'' NPT(F) thread--connect plastic pipe to match your required submersion depth.
Cole-Parmer pH Electrode Extension Cable, 10 ft
Heavy-duty shielded extension cables for pH and ORP electrodes are insulated for strength and noise reduction.
Cole-Parmer General Purpose pH Electrode, 10-ft Cable
General-purpose single-junction electrodes are economical yet accurate. Can be used for measurements up to pH 13. Maximum pressure is 150 psi at 25°>C.
Oakton by Cole-Parmer Ion-Selective Electrode (ISE), Cyanide, Double-Junction, BNC
Easily fit this electrode of cyanide with glass body into small spaces without any added reference electrode.